GPIB Archives - RN Embedded Solutions

5492C

admin — Mon, 01 Apr 2024 10:20:59 +0000

The 5490C Series 5½ and 6½-digit bench multimeters are designed for accuracy, repeatability and ease-of-use. A wide measurement range with speeds up to 1000 readings per second, and a basic DCV accuracy up to 35 ppm deliver stable measurement results quickly and accurately. These general purpose meters are well suited for demanding engineering, production and service applications.

The intuitive 4.3-inch LCD offers a variety of measurement display modes including numeric, bar meter, trend chart, and histogram. The built-in math functions, statistics display, and dual measurement capabilities offer convenient ways to capture and analyze measurement data.

12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
High-contrast 4.3-inch full color LCD
Measurement speed up to 1000 readings/s
DCV basic accuracy up to 35 ppm (0.0035%)
Histogram, bar graph, trend chart, and numeric display options
Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
Null, dB, dBm, %, mx+b, and run/stop math functions
AC frequency measurements to 1MHz
Internal storage buffer for up to 10,000 readings
2 and 4-wire resistance measurements down to 10 Ω
Dual measurement display
Rear input terminals for rack use (6 ½-digit model only)
Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
Front panel USB host port to export measurements, screen captures and save/recall settings
LabVIEW^TM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5492C appeared first on RN Embedded Solutions.

5492CGPIB

admin — Mon, 01 Apr 2024 10:11:06 +0000

12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
High-contrast 4.3-inch full color LCD
Measurement speed up to 1000 readings/s
DCV basic accuracy up to 35 ppm (0.0035%)
Histogram, bar graph, trend chart, and numeric display options
Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
Null, dB, dBm, %, mx+b, and run/stop math functions
AC frequency measurements to 1MHz
Internal storage buffer for up to 10,000 readings
2 and 4-wire resistance measurements down to 10 Ω
Dual measurement display
Rear input terminals for rack use (6 ½-digit model only)
Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
Front panel USB host port to export measurements, screen captures and save/recall settings
LabVIEW^TM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5492CGPIB appeared first on RN Embedded Solutions.

5493CGPIB

admin — Mon, 01 Apr 2024 09:41:07 +0000

12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
High-contrast 4.3-inch full color LCD
Measurement speed up to 1000 readings/s
DCV basic accuracy up to 35 ppm (0.0035%)
Histogram, bar graph, trend chart, and numeric display options
Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
Null, dB, dBm, %, mx+b, and run/stop math functions
AC frequency measurements to 1MHz
Internal storage buffer for up to 10,000 readings
2 and 4-wire resistance measurements down to 10 Ω
Dual measurement display
Rear input terminals for rack use (6 ½-digit model only)
Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
Front panel USB host port to export measurements, screen captures and save/recall settings
LabVIEW^TM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5493CGPIB appeared first on RN Embedded Solutions.

2565B

admin — Fri, 29 Mar 2024 09:32:57 +0000

The 2560B Model 2560B B&K Precision Digital Storage (DSO) and Mixed Signal Oscilloscope (MSO) Series offers 100 MHz, 200 MHz and 350 MHz bandwidth models in a 4-channel configuration, with a sample rate of 2 GSa/s and a maximum memory depth of 200 Mpts. Additionally, these oscilloscopes are equipped with a large 10.1″ capacitive touch display that provide 1024 x 600 resolution and intuitive touchscreen gestures. This series extends its debugging capabilities with new software features including zone triggers, Bode plots and power analysis. The 50 MHz arbitrary waveform generator and serial decoding for I²C, SPI, UART, CAN and LIN protocols are standard in all models. DSO models can be upgraded to an MSO, providing 16 digital channels, at any time after purchase. Additional software upgrades are available for serial decoding of FlexRay, I²S, CAN FD, MIL-STD-1553B, SENT and Manchester protocols. To purchase a license key for any of the options, please fill out the license request form.

100 MHz, 200 MHz and 350 MHz Bandwidth
2 GSa/s maximum sample rate
200 Mpts maximum memory depth
Waveform update rates of 120,000 wfms/s (normal Mode) and 500,000 wfms/s (sequence mode)
16 digital channels with logic probe set (included with -MSO models)
Serial bus decoding for I²C, SPI, UART, CAN, and LIN protocols
50 MHz DDS waveform generator and Bode plots
Large 10.1” TFT-LCD capacitive touchscreen, 1024 x 600 resolution
Power analysis feature evaluates 11 different power supply parameters
Segmented acquisition and history function with a maximum storage of 90,000 frames
Math feature supports 2 traces, FFT operation and a formula editor
Standard LAN, USBTMC-compliant USB device port and two USB host ports
Remote control available through built-in web server or PC software
- Pass/Fail Trig out and EXT Trig
Model 2560B B&K Precision

The post 2565B appeared first on RN Embedded Solutions.

8602

admin — Thu, 28 Mar 2024 11:19:10 +0000

The 8600/B Model 8602 BK Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

Wide voltage and current range, 0 to 500 V, 0 to 240 A
CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
GPIB optional on select models
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Model 8602 BK Precision

The post 8602 appeared first on RN Embedded Solutions.

8600

admin — Thu, 28 Mar 2024 09:44:44 +0000

The Model 8600/b B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

Wide voltage and current range, 0 to 500 V, 0 to 240 A
CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
GPIB optional on select models
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Model 8600 B&K Precision

The post 8600 appeared first on RN Embedded Solutions.

8601

admin — Thu, 28 Mar 2024 09:16:15 +0000

The 8600/B Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

Wide voltage and current range, 0 to 500 V, 0 to 240 A
CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
GPIB optional on select models
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection

The post 8601 appeared first on RN Embedded Solutions.

8602

admin — Thu, 28 Mar 2024 09:03:50 +0000

The 8600/B Model 8602 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

Wide voltage and current range, 0 to 500 V, 0 to 240 A
CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
GPIB optional on select models
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Model 8602 B&K Precision

The post 8602 appeared first on RN Embedded Solutions.

8610

admin — Thu, 28 Mar 2024 06:18:24 +0000

The 8600/B Model 8610 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

Wide voltage and current range, 0 to 500 V, 0 to 240 A
CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
GPIB optional on select models
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Model 8610 B&K Precision

The post 8610 appeared first on RN Embedded Solutions.

8612

admin — Wed, 27 Mar 2024 11:44:08 +0000

The 8600/B Model 8612 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

Wide voltage and current range, 0 to 500 V, 0 to 240 A
CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
GPIB optional on select models
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Model 8612 B&K Precision

The post 8612 appeared first on RN Embedded Solutions.