200 W Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/max-power-2/200-w/ Tue, 23 Jul 2024 11:44:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.8 https://india.rnembeddedeurope.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png 200 W Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/max-power-2/200-w/ 32 32 8602 https://india.rnembeddedeurope.com/product/8602-2/ Thu, 28 Mar 2024 11:19:10 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3207 Model 8602
8600 Series
200 W Programmable DC Electronic Load
yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 BK Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 BK Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> MDL200 https://india.rnembeddedeurope.com/product/bk-precision-mdl200/ Thu, 28 Mar 2024 10:21:40 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3188 Model MDL200
MDL Series
Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4120"]

The post MDL200 appeared first on RN Embedded Solutions.

]]> The MDL Model MDL200 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL200 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL200 appeared first on RN Embedded Solutions.

]]> MDL4U200 https://india.rnembeddedeurope.com/product/bk-precision-mdl4u200/ Thu, 28 Mar 2024 10:01:26 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3173 Model MDL4U200
MDL4U Series
Programmable DC Electronic Load Module 200 W / 80 V / 40 A
3 yr Warranty

[forminator_form id="4134"]

The post MDL4U200 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U200 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U200 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002

The post MDL4U200 appeared first on RN Embedded Solutions.

]]> 8602B https://india.rnembeddedeurope.com/product/bk-precision-8602b/ Thu, 28 Mar 2024 09:27:49 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3159 Model 8602B
8600 Series
200 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="4097"]

The post 8602B appeared first on RN Embedded Solutions.

]]> The 8600/B Model 8602B B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602B B&K Precision

The post 8602B appeared first on RN Embedded Solutions.

]]> 8602 https://india.rnembeddedeurope.com/product/bk-precision-8602/ Thu, 28 Mar 2024 09:03:50 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3146 Model 8602
8600 Series
200 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 B&K Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> 1666 https://india.rnembeddedeurope.com/product/1666/ Tue, 26 Mar 2024 10:21:34 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2958 Model 1666
1665 Series
1-40V, 5A Switching DC Power Supply
1 yr Warranty

[forminator_form id="3926"]

The post 1666 appeared first on RN Embedded Solutions.

]]> The 1665, 1666, and 1667 switching DC power supplies use new switching technologies to offer more power at a lower cost than traditional linear power supplies.

  • Constant voltage (CV) operation
  • Constant current (CC) operation (current limiting)
  • Bright easy-to-read LED displays
  • Overvoltage protection

The post 1666 appeared first on RN Embedded Solutions.

]]> 1665 https://india.rnembeddedeurope.com/product/1665/ Tue, 26 Mar 2024 09:56:25 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2953 Model 1665
1665 Series
1-19.99V, 9.99A Switching DC Power Supply
1 yr Warranty

[forminator_form id="3925"]

The post 1665 appeared first on RN Embedded Solutions.

]]> The 1665, 1666, and 1667 switching DC power supplies use new switching technologies to offer more power at a lower cost than traditional linear power supplies.

  • Constant voltage (CV) operation
  • Constant current (CC) operation (current limiting)
  • Bright easy-to-read LED displays
  • Overvoltage protection

The post 1665 appeared first on RN Embedded Solutions.

]]> 1698B https://india.rnembeddedeurope.com/product/bk-precision-1698b/ Tue, 26 Mar 2024 07:46:27 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2914 Model 1698B
1696B Series
Programmable DC Power Supply, 1-60 VDC, 0-3.3 A
2 yr Warranty

[forminator_form id="3948"]

The post 1698B appeared first on RN Embedded Solutions.

]]> The 1696B, 1697B, and Model 1698B B&K Precision programmable DC power supplies deliver exceptional cost/watt value with several programming and protection features. This series improves upon previous models with increased display accuracy, simplified programming, and a USB interface with added support for basic SCPI commands. PC software is provided for timed list mode programming and data logging.

Well suited for R&D, service, production testing, and education environments all models are equipped with overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature protection (OTP).

  • Automatic CV/CC crossover operation
  • Store up to 10 voltage and current combinations for quick output
  • Lightweight and compact
  • Built-in voltage, current, and power meter
  • List mode (timed programming): program up to 20 steps
  • USB and RS485 interfaces
  • Control up to 31 power supplies from one PC through RS485, any combination of models
  • Protection features: Over voltage (OVP), Over current (OCP), Over Temperature (OTP), and key-lock function
  • Thermostatically-controlled fan (linear-speed control to minimize fan noise)
  • PC software included for remote control, test sequence generation, and data logging
  • Model 1698B B&K Precision

The post 1698B appeared first on RN Embedded Solutions.

]]> 1697B https://india.rnembeddedeurope.com/product/bk-precision-1697b/ Tue, 26 Mar 2024 07:43:37 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2912 Model 1697B
1696B Series
Programmable DC Power Supply, 1-40 VDC, 0-5 A
2 yr Warranty

[forminator_form id="3947"]

The post 1697B appeared first on RN Embedded Solutions.

]]> The 1696B, Model 1697B B&K Precision, and 1698B programmable DC power supplies deliver exceptional cost/watt value with several programming and protection features. This series improves upon previous models with increased display accuracy, simplified programming, and a USB interface with added support for basic SCPI commands. PC software is provided for timed list mode programming and data logging.

Well suited for R&D, service, production testing, and education environments all models are equipped with overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature protection (OTP).

  • Automatic CV/CC crossover operation
  • Store up to 10 voltage and current combinations for quick output
  • Lightweight and compact
  • Built-in voltage, current, and power meter
  • List mode (timed programming): program up to 20 steps
  • USB and RS485 interfaces
  • Control up to 31 power supplies from one PC through RS485, any combination of models
  • Protection features: Over voltage (OVP), Over current (OCP), Over Temperature (OTP), and key-lock function
  • Thermostatically-controlled fan (linear-speed control to minimize fan noise)
  • PC software included for remote control, test sequence generation, and data logging
  • Model 1697B B&K Precision

The post 1697B appeared first on RN Embedded Solutions.

]]> 1696B https://india.rnembeddedeurope.com/product/bk-precision-1696b/ Tue, 26 Mar 2024 07:40:06 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2907 Model 1696B
1696B Series
Programmable DC Power Supply, 1-20 VDC, 0-10 A
2 yr Warranty

[forminator_form id="3947"]

The post 1696B appeared first on RN Embedded Solutions.

]]> The Model 1696B B&K Precision, 1697B, and 1698B programmable DC power supplies deliver exceptional cost/watt value with several programming and protection features. This series improves upon previous models with increased display accuracy, simplified programming, and a USB interface with added support for basic SCPI commands. PC software is provided for timed list mode programming and data logging.

Well suited for R&D, service, production testing, and education environments all models are equipped with overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature protection (OTP).

  • Automatic CV/CC crossover operation
  • Store up to 10 voltage and current combinations for quick output
  • Lightweight and compact
  • Built-in voltage, current, and power meter
  • List mode (timed programming): program up to 20 steps
  • USB and RS485 interfaces
  • Control up to 31 power supplies from one PC through RS485, any combination of models
  • Protection features: Over voltage (OVP), Over current (OCP), Over Temperature (OTP), and key-lock function
  • Thermostatically-controlled fan (linear-speed control to minimize fan noise)
  • PC software included for remote control, test sequence generation, and data logging
  • Model 1696B B&K Precision

The post 1696B appeared first on RN Embedded Solutions.

]]>