300 W Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/max-power-2/300-w/ Wed, 24 Jul 2024 05:19:50 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://india.rnembeddedeurope.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png 300 W Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/max-power-2/300-w/ 32 32 MDL4U302 https://india.rnembeddedeurope.com/product/bk-precision-mdl4u302-2/ Thu, 28 Mar 2024 11:06:59 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3204 Model MDL4U302
MDL4U Series
Programmable DC Electronic Load Module 300 W / 80 V / 45 A
3 yr Warranty

[forminator_form id="4137"]

The post MDL4U302 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U302 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U302 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002

The post MDL4U302 appeared first on RN Embedded Solutions.

]]> 8500B https://india.rnembeddedeurope.com/product/bk-precision-8500b/ Thu, 28 Mar 2024 10:10:18 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3177 Model 8500B
8500B Series
300 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4079"]

The post 8500B appeared first on RN Embedded Solutions.

]]> The Model 8500B B&K Precision Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.

With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

  • Maximum input power up to 1500 W
  • CC/CV/CR/CW operating modes
  • Transient mode up to 10 kHz in CC mode
  • 16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
  • List mode and adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
  • USB and RS232 interfaces (8514B only)
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8500B B&K Precision

The post 8500B appeared first on RN Embedded Solutions.

]]> 8502B https://india.rnembeddedeurope.com/product/bk-precision-8502b/ Thu, 28 Mar 2024 09:51:57 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3163 Model 8502B
8500B Series
300 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4079"]

The post 8502B appeared first on RN Embedded Solutions.

]]> The 8500B Model 8502B – DC Electronic Loads Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.

With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

  • Maximum input power up to 1500 W
  • CC/CV/CR/CW operating modes
  • Transient mode up to 10 kHz in CC mode
  • 16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
  • List mode and adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
  • USB and RS232 interfaces (8514B only)
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8502B – DC Electronic Loads

The post 8502B appeared first on RN Embedded Solutions.

]]> MDL305 https://india.rnembeddedeurope.com/product/bk-precision-mdl305/ Thu, 28 Mar 2024 08:33:51 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3144 Model MDL305
MDL Series
Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4130"]

The post MDL305 appeared first on RN Embedded Solutions.

]]> The MDL Modelo MDL305 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Modelo MDL305 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL305 appeared first on RN Embedded Solutions.

]]> MDL4U305 https://india.rnembeddedeurope.com/product/bk-precision-mdl4u305/ Thu, 28 Mar 2024 08:27:28 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3142 Model MDL4U305
MDL4U Series
Programmable DC Electronic Load Module 300 W / 500 V / 20 A
3 yr Warranty

[forminator_form id="4140"]

The post MDL4U305 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U305 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U305 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

The post MDL4U305 appeared first on RN Embedded Solutions.

]]> MDL302 https://india.rnembeddedeurope.com/product/bk-precision-mdl302/ Thu, 28 Mar 2024 06:26:37 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3133 Model MDL302
MDL Series
Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4129"]

The post MDL302 appeared first on RN Embedded Solutions.

]]> The MDL Model MDL302 B&K Precision  Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL302 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

 

The post MDL302 appeared first on RN Embedded Solutions.

]]> MDL505 https://india.rnembeddedeurope.com/product/bk-precision-mdl505/ Thu, 28 Mar 2024 06:23:19 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3128 Model MDL505
MDL Series
500 W Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4145"]

The post MDL505 appeared first on RN Embedded Solutions.

]]> The MDL Model MDL505 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL505 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

 

The post MDL505 appeared first on RN Embedded Solutions.

]]> MDL4U302 https://india.rnembeddedeurope.com/product/mdl4u302/ Thu, 28 Mar 2024 06:09:07 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3125 Model MDL4U302
MDL4U Series
Programmable DC Electronic Load Module 300 W / 80 V / 45 A
3 yr Warranty

[forminator_form id="4034"]

The post MDL4U302 appeared first on RN Embedded Solutions.

]]> The Model MDL4U302 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1
*The MDL4U252 and Model MDL4U302 B&K Precision are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL4U302 appeared first on RN Embedded Solutions.

]]> 1685B https://india.rnembeddedeurope.com/product/bk-precision-1685b/ Tue, 26 Mar 2024 09:32:11 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2936 Model 1685B
1685B Series
1-60V 0-5A Switching DC Power Supply
2 yr Warranty

[forminator_form id="3937"]

The post 1685B appeared first on RN Embedded Solutions.

]]> The Model 1685B B&K Precision, 1687B, and 1688B switching mode DC power supplies provide various configurations of high output voltage or high output current in a small, lightweight form factor. In addition to their constant voltage (CV) and constant current (CC) modes, these high efficiency DC power supplies offer unique preset and remote control modes. Up to three different presets of voltage and current values can be saved for quick recall through a rear switch. For remote control, an analog remote control terminal is accessible on the rear, or use the USB interface to communicate with the power supply via PC software or remote commands. These features make the Model 1685B B&K Precision, 1687B, and 1688B suitable for a wide range of applications including production testing, telecommunications, R&D, electronic field service, and university labs.

  • Automatic CV/CC crossover operation
  • Lightweight and compact
  • Rotary encoder control for precise voltage and current setting
  • 3 user-defined voltage and current presets
  • USB interface with PC software for remote control and external timed programming
  • Analog remote control function
  • Overvoltage, overtemperature, and overload protection

The post 1685B appeared first on RN Embedded Solutions.

]]> 9141 https://india.rnembeddedeurope.com/product/bk-precision-9141/ Mon, 25 Mar 2024 06:04:23 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=2740 Model 9141
9140 Series
Triple Output Multi-Range DC Power Supply 60V / 4A / 300W
3 yr Warranty

[forminator_form id="3999"]

The post 9141 appeared first on RN Embedded Solutions.

]]> The 9140 Model 9141 B&K Precision Series triple output multi-range DC power supplies combine industry-leading power density and performance with an extensive set of features in a compact 2U form factor. Three isolated output channels each produce 100 W of clean power with low ripple and noise characteristics. Combine channels for up to 300 W total output power.

Powerful list mode programming enables users to set up and execute complex test sequences directly from the front panel. Multiple outputs, USB data logging, and comprehensive protection features make these power supplies suitable for a wide range of benchtop or test system applications.

  • Three independent, floating output channels for up to 100 W per channel or 300 W total
  • High power density, compact 2U half-rack form factor
  • Multi-ranging operation
  • Low output ripple and noise down to 1 mVrms
  • Combine outputs to increase voltage up to 180 V or 24 A (depending on model)
  • Advanced and easy to use list mode programming
  • Channel coupling, tracking, configurable delays
  • Direct data logging to USB flash drive
  • Thermostatically-controlled fans for quiet operation
  • Adjustable voltage and current slew rates
  • OVP, OCP, OTP, and key-lock protections
  • USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option
  • LabVIEWTM, IVI-C, and IVI.NET drivers provided
  • Operating software available
  • cTUVus certification mark
  • Model 9141 B&K Precision

The post 9141 appeared first on RN Embedded Solutions.

]]>