500 V Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/max-voltage-2/500-v/ Wed, 24 Jul 2024 05:44:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://india.rnembeddedeurope.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png 500 V Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/max-voltage-2/500-v/ 32 32 8602 https://india.rnembeddedeurope.com/product/8602-2/ Thu, 28 Mar 2024 11:19:10 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3207 Model 8602
8600 Series
200 W Programmable DC Electronic Load
yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 BK Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 BK Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> 8502B https://india.rnembeddedeurope.com/product/bk-precision-8502b/ Thu, 28 Mar 2024 09:51:57 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3163 Model 8502B
8500B Series
300 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4079"]

The post 8502B appeared first on RN Embedded Solutions.

]]> The 8500B Model 8502B – DC Electronic Loads Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.

With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

  • Maximum input power up to 1500 W
  • CC/CV/CR/CW operating modes
  • Transient mode up to 10 kHz in CC mode
  • 16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
  • List mode and adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
  • USB and RS232 interfaces (8514B only)
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8502B – DC Electronic Loads

The post 8502B appeared first on RN Embedded Solutions.

]]> 8602B https://india.rnembeddedeurope.com/product/bk-precision-8602b/ Thu, 28 Mar 2024 09:27:49 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3159 Model 8602B
8600 Series
200 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="4097"]

The post 8602B appeared first on RN Embedded Solutions.

]]> The 8600/B Model 8602B B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602B B&K Precision

The post 8602B appeared first on RN Embedded Solutions.

]]> 8602 https://india.rnembeddedeurope.com/product/bk-precision-8602/ Thu, 28 Mar 2024 09:03:50 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3146 Model 8602
8600 Series
200 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 B&K Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> MDL305 https://india.rnembeddedeurope.com/product/bk-precision-mdl305/ Thu, 28 Mar 2024 08:33:51 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3144 Model MDL305
MDL Series
Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4130"]

The post MDL305 appeared first on RN Embedded Solutions.

]]> The MDL Modelo MDL305 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Modelo MDL305 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL305 appeared first on RN Embedded Solutions.

]]> MDL4U305 https://india.rnembeddedeurope.com/product/bk-precision-mdl4u305/ Thu, 28 Mar 2024 08:27:28 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3142 Model MDL4U305
MDL4U Series
Programmable DC Electronic Load Module 300 W / 500 V / 20 A
3 yr Warranty

[forminator_form id="4140"]

The post MDL4U305 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U305 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U305 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

The post MDL4U305 appeared first on RN Embedded Solutions.

]]> MDL4U505 https://india.rnembeddedeurope.com/product/bk-precision-mdl4u505/ Thu, 28 Mar 2024 06:00:18 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3113 Model MDL4U505
MDL4U Series
Programmable DC Electronic Load Module 500 W / 500 V / 30 A
3 yr Warranty

[forminator_form id="4142"]

The post MDL4U505 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U505 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U505 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

 

The post MDL4U505 appeared first on RN Embedded Solutions.

]]> 8612B https://india.rnembeddedeurope.com/product/bk-precision-8612b-2/ Thu, 28 Mar 2024 05:53:27 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3112 Model 8612B
8600 Series
750 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="4106"]

The post 8612B appeared first on RN Embedded Solutions.

]]> The 8600/B Series Model 8612B B&K Precision programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8612B B&K Precision

The post 8612B appeared first on RN Embedded Solutions.

]]> 8612B https://india.rnembeddedeurope.com/product/8612b/ Wed, 27 Mar 2024 11:49:11 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3106 Model 8612B
8600 Series
750 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="3977"]

The post 8612B appeared first on RN Embedded Solutions.

]]> The 8600/B Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays. Model 8612B B&K Precision

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8612B B&K Precision

The post 8612B appeared first on RN Embedded Solutions.

]]> 8612 https://india.rnembeddedeurope.com/product/bk-precision-8612/ Wed, 27 Mar 2024 11:44:08 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=3104 Model 8612
8600 Series
750 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4105"]

The post 8612 appeared first on RN Embedded Solutions.

]]> The 8600/B Model 8612 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8612 B&K Precision

The post 8612 appeared first on RN Embedded Solutions.

]]>