These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

• Single and dual output models with up to 210W output power
• Exceptionally low ripple and noise
• Front and rear panel output
• List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
• Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
• Fast transient response time of < 50 us for most models
• Fast command processing time < 10 ms
• Programmable voltage and current slew rates
• Standard USB interface
• 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
• LabVIEW (TM) drivers available
• Model 9185B B&K Precision

The post 9185B appeared first on RN Embedded Solutions.

The XLN series is perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, production, electro-plating and other applications requiring high, reliable power.

• Compact, high density, 1U package
• USB and RS485 interface (standard)
• -GL versions add GPIB and LAN interfaces
• External analog programming interface
• Easy to configure master/slave mode for series & parallel connection of up to 4 units
• Control up to 30 power supplies from one PC synchronized via the RS485 interface
• Application software providing remote control capabilities included
• Programmable voltage and current slew rate allow for “soft starting” of loads
• LabVIEW (TM) drivers available
• 5 V/1 A fixed output for auxiliary output (models XLN3640, XLN6024, XLN8018, and XLN10014 only)
• Model XLN60026 B&K Precision

The post XLN60026 appeared first on RN Embedded Solutions.

The XLN series is perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, production, electro-plating and other applications requiring high, reliable power.

• Compact, high density, 1U package
• USB and RS485 interface (standard)
• -GL versions add GPIB and LAN interfaces
• External analog programming interface
• Easy to configure master/slave mode for series & parallel connection of up to 4 units
• Control up to 30 power supplies from one PC synchronized via the RS485 interface
• Application software providing remote control capabilities included
• Programmable voltage and current slew rate allow for “soft starting” of loads
• LabVIEW (TM) drivers available
• 5 V/1 A fixed output for auxiliary output (models XLN3640, XLN6024, XLN8018, and XLN10014 only)
• Model XLN60026-GL B&K Precision

The post Model XLN60026-GL appeared first on RN Embedded Solutions.

The PVS Series is well suited for both bench use and ATE systems integration, R&D, design verification, production test, and high voltage testing. In particular, the low-noise characteristic of the PVS Series makes these instruments ideal for motor inverter testing. When operated with the optional SAS software, these power supplies can be used for solar array testing applications.

• Compact, high power density, 2U package
• Output up to 1000V/5A (PVS10005) and 600V/8.5A (PVS60085 & PVS60085MR)
• Model PVS60085MR is multi-ranging, allowing any combination of the rated voltage and current up to 3000 W
• Convenient single-phase AC input configuration
• Bright VFD display
• High voltage and current resolution of 100 mV, 0.1 mA (PVS10005) or 10 mV, 0.2 mA (PVS60085 & PVS60085MR)
• Fast transient response time of ≤ 0.5 ms
• Adjustable voltage and current slope (rise and fall times)
• List mode: 9 user-defined programs with up to 100 programmable steps each
• Built-in SAS function for storage of up to 16 I-V curves with Voc, Isc, Vmp, and Imp parameters and 1024-point table
• Standard USB (virtual COM), RS232, GPIB and LAN interfaces supporting SCPI commands
• External analog programming and monitoring interface
• LabVIEW driver and softpanel available for remote control, test sequence generation, and datalogging
• Model PVS60085MR B&K Precision

Solar Array Simulation (SAS) Software Option 

• Ideal for testing PV and motor inverters
• Simulate I-V curves under different weather conditions while validating the solar inverter’s MPPT algorithm
• Test to EN50530 and Sandia Labs standards
• Monitors and logs real-time voltage, current, power, MPPT efficiency, and average MPPT efficiency
• User-definable irradiance profile

The post PVS60085MR appeared first on RN Embedded Solutions.

The PVS Series is well suited for both bench use and ATE systems integration, R&D, design verification, production test, and high voltage testing. In particular, the low-noise characteristic of the PVS Series makes these instruments ideal for motor inverter testing. When operated with the optional SAS software, these power supplies can be used for solar array testing applications.

• Compact, high power density, 2U package
• Output up to 1000V/5A (PVS10005) and 600V/8.5A (PVS60085 & PVS60085MR)
• Model PVS60085MR is multi-ranging, allowing any combination of the rated voltage and current up to 3000 W
• Convenient single-phase AC input configuration
• Bright VFD display
• High voltage and current resolution of 100 mV, 0.1 mA (PVS10005) or 10 mV, 0.2 mA (PVS60085 & PVS60085MR)
• Fast transient response time of ≤ 0.5 ms
• Adjustable voltage and current slope (rise and fall times)
• List mode: 9 user-defined programs with up to 100 programmable steps each
• Built-in SAS function for storage of up to 16 I-V curves with Voc, Isc, Vmp, and Imp parameters and 1024-point table
• Standard USB (virtual COM), RS232, GPIB and LAN interfaces supporting SCPI commands
• External analog programming and monitoring interface
• LabVIEW driver and softpanel available for remote control, test sequence generation, and datalogging
• Model PVS60085 B&K Precision

Solar Array Simulation (SAS) Software Option 

• Ideal for testing PV and motor inverters
• Simulate I-V curves under different weather conditions while validating the solar inverter’s MPPT algorithm
• Test to EN50530 and Sandia Labs standards
• Monitors and logs real-time voltage, current, power, MPPT efficiency, and average MPPT efficiency
• User-definable irradiance profile

The post Model PVS60085 appeared first on RN Embedded Solutions.