2.5" SATA SSD Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/product-category/sata/2-5-sata-ssd/ Fri, 21 Jun 2024 06:24:15 +0000 en-US hourly 1 https://wordpress.org/?v=6.8 https://india.rnembeddedeurope.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png 2.5" SATA SSD Archives - RN Embedded Solutions https://india.rnembeddedeurope.com/product-category/sata/2-5-sata-ssd/ 32 32 SATA Revision 3.2 https://india.rnembeddedeurope.com/product/sata-revision-3-2/ Fri, 21 Jun 2024 06:24:10 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=5864 Product Specifications Series Name HF3-25AC Interface SATA Revision 3.2 Capacity Coverage 60GB ~ 2TB Capacity 3D TLC 60GB ~ 2TB 3D pSLC 16GB ~ 512GB Performance Overview Seq. R :…

The post SATA Revision 3.2 appeared first on RN Embedded Solutions.

]]> Product Specifications
Series Name HF3-25AC
Interface SATA Revision 3.2
Capacity Coverage 60GB ~ 2TB
Capacity
3D TLC 60GB ~ 2TB
3D pSLC 16GB ~ 512GB
Performance Overview Seq. R : 550 MB/s ; Seq. W : 500 MB/s
Performance
3D TLC Seq. R : 550 MB/s ; Seq. W : 500 MB/s
3D pSLC Seq. R : 550 MB/s ; Seq. W : 500 MB/s
Standard Operating Temperature 0~70°C
Extended Operating Temperature -40~85°C
Dimension LxWxH (mm) 100.10mm(L) x 69.85mm(W) x 7.00mm(H)
Technology #conformal coating   #PLP   #S.M.A.R.T   #Secure Erase   #Physical Destory

Have Questions?
Get in Touch!

We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.


The post SATA Revision 3.2 appeared first on RN Embedded Solutions.

]]> SATA Revision 3.1 https://india.rnembeddedeurope.com/product/sata-revision-3-1-4/ Fri, 21 Jun 2024 06:15:14 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=5861
  • Being fully compliant with standard 2.5-inch form factor, providing low power consumption compared to traditional hard drive and hot-swapping.
  • Operating at a maximum operating frequency of 200MHz with 30MHz external crystal.
  • Provide a wide range up to 1TB, and it can reach up to 550MB/s read as well as 500MB/s write (with 32MB SDR cache enabled and measured by CrystalDiskMark v5.0).

    • The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>     Product Specifications
    Series Name HF3-25UB
    Interface SATA Revision 3.1
    Capacity Coverage 2GB ~ 960GB
    Capacity
    SLC 8GB ~ 128GB
    MLC 4GB ~ 512GB
    2D pSLC 2GB ~ 256GB
    3D TLC 32GB ~ 1TB
    3D pSLC 8GB ~ 256GB
    Performance Overview Seq. R : 550 MB/s ; Seq. W : 500 MB/s
    Performance
    SLC Seq. R : 540 MB/s ; Seq. W : 420 MB/s
    MLC Seq. R : 550 MB/s ; Seq. W : 490 MB/s
    2D pSLC Seq. R : 550 MB/s ; Seq. W : 490 MB/s
    3D TLC Seq. R : 550 MB/s ; Seq. W : 500 MB/s
    3D pSLC Seq. R : 550 MB/s ; Seq. W : 490 MB/s
    Standard Operating Temperature 0~70°C
    Extended Operating Temperature -40~85°C
    Dimension LxWxH (mm) 100.10mm(L) x 69.85mm(W) x 7.00mm(H)
    Technology #S.M.A.R.T   #conformal coating   #Secure Erase   #Write Protect

    Have Questions?
    Get in Touch!

    We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.


    The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>         SATA Revision 3.1 https://india.rnembeddedeurope.com/product/sata-revision-3-1-3/ Fri, 21 Jun 2024 06:10:50 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=5857
  • Being fully compliant with standard 2.5-inch form factor, providing low power consumption compared to traditional hard drive and hot-swapping.
  • Operating at a maximum operating frequency of 300MHz with 30MHz external crystal.
  • Its capacity could provide a wide range up to 2TB.
  • Reach up to 550MB/s read as well as 530MB/s write high performance based on Toshiba’s NAND flash (with 256MB/512MB/1024MB/2048MB DDR3 cache enabled and measured by CrystalDiskMark).

    • The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>     Product Specifications
    Series Name HF3-25UA
    Interface SATA Revision 3.1
    Capacity Coverage 64GB~2TB
    Capacity
    SLC 32GB~256GB
    MLC 64GB~2TB
    2D pSLC 32GB~1TB
    Performance Overview Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    Performance
    SLC Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    MLC Seq. R : 550 MB/s ; Seq. W : 500 MB/s
    2D pSLC Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    Standard Operating Temperature 0~70°C
    Extended Operating Temperature -40~85°C
    Dimension LxWxH (mm) 100.10mm(L) x 69.85mm(W) x 7.00mm(H)
    Technology #S.M.A.R.T   #PLP   #conformal coating   #Write Protect   #Secure Erase

    Have Questions?

    Get in Touch!

    We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.


    The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>         SATA Revision 3.1 https://india.rnembeddedeurope.com/product/sata-revision-3-1-2/ Fri, 21 Jun 2024 06:07:57 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=5855
  • Being fully compliant with standard 2.5-inch form factor, providing low power consumption compared to traditional hard drive and hot-swapping.
  • Based on the standard 7-pin interface for data segment and 15-pin for power segment with a wide range capacity up to 2TB.
  • Reaches up to 550MB/s read & 510MBB/s write.

    • The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>     Product Specifications
    Series Name HF3-25DE
    Interface SATA Revision 3.1
    Capacity Coverage 32GB ~ 2TB
    Capacity
    3D TLC 64GB ~ 2TB
    3D pSLC 32GB ~ 512GB
    Performance Overview Seq. R : 550 MB/s ; Seq. W : 510 MB/s
    Performance
    3D TLC Seq. R : 550 MB/s ; Seq. W : 510 MB/s
    3D pSLC Seq. R : 550 MB/s ; Seq. W : 510 MB/s
    Standard Operating Temperature 0~70°C
    Extended Operating Temperature -40~85°C
    Dimension LxWxH (mm) 100.10mm(L) x 69.85mm(W) x 7.00mm(H)
    Technology #S.M.A.R.T   #conformal coating   #Write Protect   #Secure Erase

    Have Questions?
    Get in Touch!

    We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.


    The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>         SATA Revision 3.1 https://india.rnembeddedeurope.com/product/sata-revision-3-1/ Fri, 21 Jun 2024 06:01:50 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=5852
  • Being fully compliant with standard 2.5-inch form factor, providing low power consumption compared to traditional hard drive.
  • Based on the standard 7-pin interface for data segment and 15-pin for power segment.
  • Its capacity could provide a wide range up to 16TB.
  • Reach up to 550MB/s read as well as 530MB/s write high performance based on 3D TLC NAND flash.

    • The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>     Product Specifications
    Series Name HF3-25DC
    Interface SATA Revision 3.1
    Capacity Coverage 60GB ~ 15360GB
    Capacity
    3D TLC 120GB ~ 15360GB
    3D pSLC 60GB ~ 1920GB
    Performance Overview Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    Performance
    3D TLC Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    3D pSLC Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    Standard Operating Temperature 0~70°C
    Extended Operating Temperature -40~85°C
    Dimension LxWxH (mm) Type 1 : 100.10mm(L) x 69.85mm(W) x 7.00mm(H)
    Type 2 : 100.10mm(L) x 69.85mm(W) x 9.50mm(H)
    Technology #S.M.A.R.T   #PLP   #conformal coating   #Write Protect   #Thermal Throttling   #Secure Erase   #OPAL

    Have Questions?
    Get in Touch!

    We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.


    The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>         SATA Revision 3.1 https://india.rnembeddedeurope.com/product/hf3-25da/ Fri, 21 Jun 2024 05:55:22 +0000 https://india.rnembeddedeurope.com/?post_type=product&p=5848
  • Being fully compliant with standard 2.5-inch form factor, providing low power consumption compared to traditional hard drive.
  • Based on the standard 7-pin interface for data segment and 15-pin for power segment.
  • Its capacity could provide a wide range up to 2TB.
  • Reach up to 550MB/s read as well as 530MB/s write high performance based on 3D TLC NAND flash.
  • FIPS 140-2 Level 2 certified: Certificate number #3940

    • The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>     Product Specifications
    Series Name HF3-25DA
    Interface SATA Revision 3.1
    Capacity Coverage 128GB~4TB
    Capacity
    3D TLC 128GB~4TB
    Performance Overview Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    Performance
    3D TLC Seq. R : 550 MB/s ; Seq. W : 530 MB/s
    Standard Operating Temperature 0~70°C
    Extended Operating Temperature -40~85°C
    Dimension LxWxH (mm) 100mm(L) x 69.85mm(W) x 7.00mm(H)
    Technology #S.M.A.R.T   #Thermal Throttling   #OPAL   #FIPS

    Have Questions?
    Get in Touch!

    We would like to hear from you. Please send us a message by filling out the form below and we will get back to you shortly.


    The post SATA Revision 3.1 appeared first on RN Embedded Solutions.

    ]]>